POWER WINDOW CONTROL SYSTEM Jam Protection Function does not Operate

DESCRIPTION

This symptom may occur for any of the windows.

The jam protection function operates within a specified range during the manual up or auto up operation.

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   PERFORM INITIALIZATION (APPLICABLE LOCATION)

   
   

   1. Initialize the power window regulator motor assembly (applicable location) (Click here).

   
   
   • NEXTClick here
2. Click here

   CHECK POWER WINDOW CONTROL SYSTEM (AUTO UP/DOWN FUNCTION)

   
   

   1. Check if the power window auto up and down functions operate normally (Click here).

      OK
      Auto up and down functions are normal.

   
   
   • OKClick here
   • NG

     GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) (Click here)

3. Click here

   CHECK JAM PROTECTION FUNCTION OPERATING RANGE

   
   

   1. Check if the jam protection function operates normally for the applicable power window.

      Tip:

      The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.

      OK
      Jam protection function operates normally.

      Result
      Result Proceed to OK A NG (Driver door power window) B NG (Front passenger door power window) B NG (Rear LH door power window) C NG (Rear RH door power window) C

   
   
   • A

     END (PROBLEM DUE TO INITIALIZATION FAILURE)

   • B

     REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR OR FRONT PASSENGER DOOR) (Click here)

   • C

     REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR REAR LH DOOR OR REAR RH DOOR) (Click here)