POWER WINDOW CONTROL SYSTEM Key-off Operation Function Operates even if Operating Conditions are not Satisfied

DESCRIPTION

• When the front doors are closed, each power window regulator motor assembly can control its power window operation for approximately 43 seconds after the power switch is turned from on (IG) to off by receiving operation permission signals from the main body ECU (multiplex network body ECU).

• However, when approximately 43 seconds have elapsed, or the driver door or front passenger door is opened within approximately 43 seconds of the power switch being turned off, the power window regulator motor assembly stops operating.

• During an auto operation, when 43 seconds have passed and key-off operation is prohibited, the window continues the operation until the auto operation is completed.

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   CHECK MANUAL UP / DOWN FUNCTION

   
   

   1. Check that the manual up and down functions using the multiplex network master switch assembly and power window regulator switch assembly can operate all the power windows (Click here).

      OK
      Manual up and down functions are normal.

   
   
   • OKClick here
   • NG

     GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) (Click here)

2. Click here

   CHECK REMOTE UP / DOWN FUNCTION

   
   

   1. Check that the remote up and down functions using the multiplex network master switch assembly can operate all the power windows (Click here).

      OK
      Remote up and down functions are normal.

   
   
   • OKClick here
   • NG

     GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) (Click here)

3. Click here

   CHECK OPERATION FUNCTION AFTER POWER SWITCH IS TURNED OFF

   
   

   1. Check the power window operation function after the power switch is turned off.

      Result

      Result Proceed to When power window can still be operated even after opening driver door or front passenger door within approximately 43 seconds of power switch being turned off A When power window can still be operated even after approximately 43 seconds have elapsed after power switch is turned off (for All Doors) B When power window can still be operated even after approximately 43 seconds have elapsed after power switch is turned off (for Driver Door or Front Passenger Door) C When power window can still be operated even after approximately 43 seconds have elapsed after power switch is turned off (for Rear LH Door or Rear RH Door) D

   
   
   • AClick here
   • B

     REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (Click here)

   • C

     REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR OR FRONT PASSENGER DOOR) (Click here)

   • D

     REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR REAR LH DOOR OR REAR RH DOOR) (Click here)

4. Click here

   READ VALUE USING GTS (MAIN BODY)

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the power switch on (IG).

   3. Turn the GTS on.

   4. Enter the following menus: Body Electrical / Main Body / Data List.

   5. Read the Data List according to the display on the GTS.

      Table 1. Main Body

      Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
      FR Door Courtesy SW	Front door courtesy switch RH signal / ON or OFF	OFF: Front door RH closed ON: Front door RH open	-
      FL Door Courtesy SW	Front door courtesy switch LH signal / ON or OFF	OFF: Front door LH closed ON: Front door LH open	-

      OK
      On the GTS screen, ON or OFF is displayed accordingly.

   
   
   • OK

     REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (Click here)

   • NG

     GO TO LIGHTING SYSTEM (Proceed to Front Door Courtesy Switch Circuit) (Click here)