REAR SUNSHADE SWITCH INSPECTION

PROCEDURE


  1. INSPECT REAR SUNSHADE SWITCH (COMBINATION SWITCH ASSEMBLY)


    1. A01W25YE01
      Text in Illustration
      *a

      Component without harness connected

      (Rear Sunshade Switch (Combination Switch Assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 8 Rear sunshade switch pushed Below 1 Ω
      2 - 8 Rear sunshade switch not pushed 10 kΩ or higher

      If the result is not as specified, replace the rear sunshade switch (combination switch assembly).