REAR SUNSHADE ASSEMBLY REMOVAL

PROCEDURE

1. Click here

   REMOVE REAR SEAT ASSEMBLY

   (Click here)

2. Click here

   REMOVE REAR DOOR SCUFF PLATE LH

   Click here

3. Click here

   REMOVE REAR DOOR SCUFF PLATE RH

   Tip:

   Use the same procedure as for the LH side.

4. Click here

   REMOVE REAR SEAT SIDE GARNISH LH

   Click here

5. Click here

   REMOVE REAR SEAT SIDE GARNISH RH

   Tip:

   Use the same procedure as for the LH side.

6. Click here

   REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

   Click here

7. Click here

   REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

   Tip:

   Use the same procedure as for the LH side.

8. Click here

   DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

   Click here

9. Click here

   DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

   Click here

10. Click here

    REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

    Click here

11. Click here

    DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

    Click here

12. Click here

    REMOVE REAR SEAT SHOULDER BELT HOLE COVER

    Click here

13. Click here

    REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

14. Click here

    REMOVE CENTER STOP LIGHT SET

    Click here

15. Click here

    REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY

    
    
    1. 

       Disengage the 3 clips and 5 guides, and remove the No. 2 package tray trim panel assembly.

16. Click here

    REMOVE REAR WINDOW SHADE ASSEMBLY

    
    
    1. 

       Disconnect the connector.

    2. Remove the 4 bolts (A).

    3. Loosen the bolt (B) and remove the rear window shade assembly.

       Note:

       The bolt (B) cannot be removed from the rear window shade assembly.

17. Click here

    REMOVE REAR SUNSHADE RELAY

    Note:

    When disassembling the rear sunshade assembly, eliminate static electricity by touching the vehicle body to prevent the components from being damaged.

    
    
    1. 

       Remove the 2 screws.

    2. Disengage the 2 pins and disconnect the link.

    3. 

       Remove the 8 screws and rear sunshade relay cover.

    4. 

       Disconnect the connector.

    5. Remove the 2 screws and rear sunshade relay.