ROOF HEADLINING INSTALLATION

Info Added 2017-08-02

PROCEDURE


  1. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. B001VIJE01
      Text in Illustration
      *1 Alignment Mark (Orange)

      Align the alignment mark (orange) on a new rear door opening trim weatherstrip LH with the protruding portion on the vehicle body indicated by the arrow in the illustration, and install it.

      Note

      After installation, check that the corners fit correctly.

  2. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH


    1. B001VDQE01
      Text in Illustration
      *1 Alignment Mark (White)

      Align the alignment mark (white) on a new rear door opening trim weatherstrip RH with the protruding portion on the vehicle body indicated by the arrow in the illustration, and install it.

      Note

      After installation, check that the corners fit correctly.

  3. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. B001VJCE01
      Text in Illustration
      *1 Alignment Mark (Blue)

      Align the alignment mark (blue) on a new front door opening trim weatherstrip LH with the protruding portion on the vehicle body indicated by the arrow in the illustration, and install it.

      Note

      After installation, check that the corners fit correctly.

  4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    1. B001VF0E01
      Text in Illustration
      *1 Alignment Mark (Pink)

      Align the alignment mark (pink) on a new front door opening trim weatherstrip RH with the protruding portion on the vehicle body indicated by the arrow in the illustration, and install it.

      Note

      After installation, check that the corners fit correctly.

  5. INSTALL ROOF HEADLINING ASSEMBLY


    1. B001VIVE04
      Text in Illustration
      *1 Clip (Black)
      *2 Clip (White)

      Install the 3 clips to the roof headlining assembly.

    2. B001VGD

      Put the roof headlining assembly into the vehicle through the rear door as shown in the illustration.

      Note

      Do not damage the roof headlining assembly or vehicle interior.

    3. Engage the guide.

      B001VECE05

    4. Engage the 2 claws to install each base of the visor holder.

      Tech Tips

      Install the base of the visor holders in the order shown in the illustration.

    5. Engage the 3 clips to install the roof headlining assembly.

    6. Engage the 12 claws and 8 fasteners.

      B001VJ0E05
      Text in Illustration
      *A w/o Roof Antenna *B w/ Roof Antenna
      *1 Clamp *2 Fastener
      *a Front Pillar LH *b Front Pillar RH
      *c Rear Pillar RH *d Sliding Roof Drive Gear Sub-assembly

    7. Connect the 2 connectors and engage the 3 clamps to the front pillar LH.

    8. Engage the 2 clamps to the front pillar RH.

    9. w/o Roof Antenna:


      1. Connect the connector and engage the clamp to the rear pillar RH.

    10. w/ Roof Antenna:


      1. Connect the 2 connectors and engage the clamp to the rear pillar RH.

    11. Connect the connector to the sliding roof drive gear sub-assembly.

    12. for Windshield Glass Side:


      1. Connect each connector.

  6. INSTALL VISOR HOLDER

    Tech Tips

    Use the same procedure for the other visor holder.


    1. B001VGL

      Install the visor holder as shown in the illustration.

  7. INSTALL VISOR ASSEMBLY LH


    1. Install the visor assembly LH with the 2 screws.

  8. INSTALL VISOR BRACKET COVER (for LH Side)


    1. B001VEL

      Engage the 4 claws to install the visor bracket cover.

  9. INSTALL VISOR ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  10. INSTALL VISOR BRACKET COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  11. INSTALL ASSIST GRIP SUB-ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side.


    1. B001VBN

      Install the 2 clips to the assist grip.

    2. Temporarily install the 2 new assist grip covers to the assist grip as shown in the illustration.

    3. B001VJD

      Engage the 2 clips to install the assist grip sub-assembly.

    4. B001VC3

      Engage the 4 claws to install the 2 assist grip covers.

  12. INSTALL REAR ASSIST GRIP ASSEMBLY LH


    1. B001VDX

      Install the 2 clips to the assist grip.

    2. Temporarily install the 2 new assist grip covers to the assist grip as shown in the illustration.

    3. B001VCL

      Engage the 2 clips to install the rear assist grip assembly LH.

    4. B001VG9

      Engage the 4 claws to install the 2 assist grip covers.

  13. INSTALL REAR ASSIST GRIP ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  14. INSTALL SPOT LIGHT ASSEMBLY

    Click here

  15. INSTALL ROOF CONSOLE BOX ASSEMBLY

    Click here

  16. INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

    Click here

  17. INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-crash Safety System)

    Click here

  18. INSTALL RAIN SENSOR COVER (w/ Pre-crash Safety System)

    w/ Rain Sensor: Click here

  19. INSTALL PROTECTOR (w/o Pre-crash Safety System)

    Click here

  20. INSTALL PROTECTOR (w/ Pre-crash Safety System)

    Click here

  21. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-crash Safety System)

    Click here

  22. INSTALL INSTRUMENT PANEL SAFETY PAD

    Click here

  23. INSTALL LOWER SHIFT LEVER ASSEMBLY

    Click here

  24. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH


    1. Engage the 2 guides.

    2. Engage the 4 clips to install the roof side inner garnish assembly LH.

  25. INSTALL REAR SEAT SIDE GARNISH LH


    1. Engage the 5 claws to install the rear seat side garnish LH.

  26. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  27. INSTALL REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  28. INSTALL CENTER PILLAR UPPER GARNISH LH


    1. Pass the floor anchor of the front seat outer belt assembly LH through the center pillar upper garnish LH.

    2. Engage the clip.

    3. Install the center pillar upper garnish LH with the 2 clips.

  29. INSTALL CENTER PILLAR LOWER GARNISH LH


    1. Engage the 2 claws and 2 guides.

    2. Engage the 5 clips to install the center pillar lower garnish LH.

  30. INSTALL REAR DOOR SCUFF PLATE LH


    1. Engage the 8 claws to install the rear door scuff plate LH.

  31. INSTALL FRONT PILLAR GARNISH LH


    1. Remove the protective cover.

    2. Make sure that the front pillar garnish clip is not damaged.

      Note

      If there is any damage, replace the garnish clip with a new one.

    3. B001VFN

      Install the front pillar garnish clip to the front pillar garnish LH.

      Tech Tips

      Install the front pillar garnish clip so that it is oriented as shown in the illustration.

    4. Engage the 2 guides as shown in the illustration.

    5. B001VIX

      Engage the 2 clips to install the front pillar garnish LH.

  32. INSTALL FRONT DOOR OPENING TRIM COVER LH


    1. Engage the 3 claws to install the front door opening trim cover LH.

  33. INSTALL COWL SIDE TRIM BOARD LH


    1. Engage the clip and claw.

    2. Install the cowl side trim board LH with the clip.

  34. INSTALL FRONT DOOR SCUFF PLATE LH


    1. Engage the 10 claws to install the front door scuff plate LH.

  35. INSTALL CENTER PILLAR UPPER GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  36. INSTALL CENTER PILLAR LOWER GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  37. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  38. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  39. INSTALL FRONT DOOR OPENING TRIM COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  40. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure as for the LH side.

  41. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  42. INSTALL REAR SEAT ASSEMBLY

    Click here

  43. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  44. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.