ROOF HEADLINING DISASSEMBLY

PROCEDURE

1. Click here

   REMOVE VANITY LIGHT ASSEMBLY

   
   

   1. Remove the vanity light assembly (Click here).

      Tip:

      Use the same procedure for the other vanity light.

2. Click here

   REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

   Click here

3. Click here

   REMOVE NO. 1 ROOF WIRE

   
   
   1. 

      Remove the adhesive tape from the roof headlining.

      Table 1. Text in Illustration

      Adhesive Tape

      -

      -

   2. 

      Turn the visor assembly LH connector and visor assembly RH connector counterclockwise approximately 90° and separate the connectors from the roof headlining.

   3. Disengage the 4 clamps and remove the No. 1 roof wire from the roof headlining.