FRONT CONSOLE BOX DISASSEMBLY

PROCEDURE

1. Click here

   REMOVE SWITCH BASE

   
   
   1. 

      Remove the 6 screws and switch base.

2. Click here

   REMOVE INSTRUMENT PANEL CUP HOLDER

   
   
   1. 

      Remove the 3 screws.

   2. Disengage the guide and remove the instrument panel cup holder.

3. Click here

   REMOVE INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY

   
   
   1. 

      Remove the 4 screws.

   2. Disengage the claw and remove the instrument panel cup holder sub-assembly.

4. Click here

   REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY

   
   
   1. 

      Remove the 4 screws and console compartment door sub-assembly.

5. Click here

   REMOVE NO. 1 CONSOLE COMPARTMENT DOOR CUSHION

   
   
   1. 

      Remove the 2 No. 1 console compartment door cushions.

6. Click here

   REMOVE NO. 2 CONSOLE BOX DUCT

   
   
   1. 

      Remove the clip and No. 2 console box duct.

7. Click here

   REMOVE NO. 1 CONSOLE BOX RETAINER

   
   
   1. 

      Disengage the 6 claws and remove the No. 1 console box retainer.

8. Click here

   REMOVE NO. 1 BOX SIDE PANEL

   
   
   1. 

      Pull the No. 1 box side panel in the direction indicated by the arrow (1) shown in the illustration to disengage the 3 claws (A).

   2. Pull the No. 1 box side panel in the direction indicated by the arrow (2) shown in the illustration to disengage the 4 claws (B) and remove the No. 1 box side panel.

9. Click here

   REMOVE NO. 2 BOX SIDE PANEL

   Tip:

   Use the same procedure as for the No. 1 box side panel.

10. Click here

    REMOVE NO. 3 CONSOLE BOX DUCT

    
    
    1. 

       Remove the 4 screws and No. 3 console box duct.

11. Click here

    REMOVE NO. 4 CONSOLE BOX DUCT

    Tip:

    Use the same procedure as for the No. 3 console box duct.

12. Click here

    REMOVE FRONT UPPER CONSOLE PANEL GARNISH

    
    

    1. Disconnect the connector.

    2. 

       Disengage the 2 claws and remove the front upper console panel garnish.

13. Click here

    REMOVE CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY

    Click here

14. Click here

    REMOVE NO. 2 INSTRUMENT PANEL WIRE

    
    
    1. 

       Disengage the 2 clamps and remove the No. 2 instrument panel wire.

15. Click here

    REMOVE UPPER NO. 1 BOX PLATE

    
    
    1. 

       Remove the 2 screws.

    2. Disengage the 3 claws and 2 guides.

    3. 

       Pull the upper No. 1 box plate in the direction indicated by the arrow (1) shown in the illustration.

    4. Pull the upper No. 1 box plate in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 claws.

    5. Disengage the guide and remove the upper No. 1 box plate.

16. Click here

    REMOVE UPPER NO. 2 BOX PLATE

    Tip:

    Use the same procedure as for the upper No. 1 box plate.

17. Click here

    REMOVE NO. 2 CONSOLE COMPARTMENT DOOR CUSHION

    
    
    1. 

       Remove the No. 2 console compartment door cushion.

       Tip:

       Use the same procedure for the RH side and LH side.