POWER WINDOW CONTROL SYSTEM SYSTEM DESCRIPTION


  1. POWER WINDOW CONTROL SYSTEM DESCRIPTION


    1. The power window control system controls the power window operation using the power window regulator motors. The main controls of this system are the multiplex network master switch assembly, which is mounted on the driver door, the power window regulator switch assembly, which is mounted on the front passenger door, and the rear power window regulator switch assemblies, which are mounted on the rear doors. Operating a window switch results in electrical power being transmitted to the corresponding power window regulator motor.

  2. FUNCTION OF MAIN COMPONENTS

    The power window control system consists of the following components:

    Component Outline
    Multiplex Network Master Switch Assembly

    • Controls power window operation for all seats.

    • When the lock switch is set to the lock position, window operation will be possible only for the driver door power window.
    Power Window Regulator Switch Assembly

    • Located on the front passenger door.

    • Controls front passenger window operation.

    Rear Power Window Regulator Switch Assembly


    • LH Door

    • RH Door

    • Located on the rear doors.

    • Each switch controls window operation for its respective window.
    Power Window Regulator Motor Assembly

    • Receives switch signals and changes signals into motor activation. As a result, the window position changes.

    • Uses the Hall-ICs in the regulator motor with the ECU to detect the window position and jamming.

  3. SYSTEM FUNCTION

    The power window control system has the following functions:

    Function Outline
    Manual up-and-down function Function that causes the window to go up while the power window switch is being pulled halfway up and to go down while it is being pushed halfway down. The window stops as soon as the switch is released.
    All door auto up-and-down function Function that enables the windows of all doors to be fully opened or closed by one full pull or push of the multiplex network master switch assembly, power window regulator switch assembly or rear power window regulator switch assembly.
    Window lock function

    • Function that disables the power window regulator switch assembly and rear power window regulator switch assembly operation when the window lock switch is pressed.

    • The power window regulator switch assembly and rear power window regulator switch assembly can be operated when the window lock switch is pressed again.
    Jam protection function Function that automatically stops the power window and moves it downward if a foreign object gets jammed in the door window during auto up and manual up operation.
    Remote control function Function that allows the multiplex network master switch assembly to control manual and auto up-and-down operations of the front passenger door window and rear door windows.
    Key-off operation function

    • Function that makes it possible to operate all power windows for approximately 43 sec. after the power switch is turned off when the driver door or front passenger door has not been opened.

    • When 43 sec. have elapsed, or the driver door or front passenger door is opened after the power switch is turned off, the key-off operation function will be disabled.

    Tech Tips

    Even if the driver door or passenger door is opened during automatic window operation while the key-off operation function is on, the window will continue operating.
    Key-linked open and close*

    • When the key is not inside the vehicle, the driver door is locked, and the key inserted into the driver door key cylinder is turned and maintained in the lock position for 1.5 seconds or more, the main body ECU (multiplex network body ECU) activates the power window regulator motor assemblies to close all power windows while the key is being turned.

    • Similarly, when the driver door is unlocked, turning and maintaining the driver door key in the unlock position for 1.5 seconds or more will cause all power windows to open.
    Wireless transmitter-linked open and close*

    • When the main body ECU (multiplex network body ECU) receives an UNLOCK signal from the electrical key transmitter for 2.4 seconds or more, the main body ECU (multiplex network body ECU) sends an operation request signal to the power window ECU in each power window regulator motor assembly. As a result, the power window regulator motors open all power windows.

    • When the main body ECU (multiplex network body ECU) receives a LOCK signal from the electrical key transmitter for 2.4 seconds or more, the main body ECU (multiplex network body ECU) sends an operation request signal to the power window ECU in each power window regulator motor assembly. As a result, the power window regulator motors close all power windows.
    Window open warning When the power switch is turned from on (IG) to off and the driver door is opened with the window open, the buzzer in the combination meter assembly sounds once. Then, a warning message appears on the multi-information display.
    Diagnosis Function that allows diagnosis of the power window control system if any of the power window ECUs (built into each power window regulator motor assembly) detects a malfunction in the system.
    Fail-safe

    • Function to disable part of power window functions if the pulse sensor in the power window motor has a malfunction.

    • Auto up-and-down function and remote control function are disabled.

    • *: This function is set through the customize function, as it is off by default.