REAR SUNSHADE SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tech Tips


  • Use this procedure to troubleshoot the rear sunshade system.

  • *: Use the GTS.

PROCEDURE


  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT

    NEXT

  2. CUSTOMER PROBLEM ANALYSIS


    1. Interview the customer, confirm the trouble Click here.

      Result
      Proceed to
      NEXT

    NEXT

  3. INSPECT AUXILIARY BATTERY VOLTAGE


    1. Measure the auxiliary battery voltage with the power switch off.

      Standard Voltage
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

      Result
      Result
      NEXT

    NEXT

  4. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*


    1. Using the GTS, check if the CAN communication system is functioning normally Click here.

      Result
      Result Proceed to
      DTC is not output A
      DTC is output B

    B

    GO TO CAN COMMUNICATION SYSTEM Click here

    A

  5. CHECK COMBINATION METER ASSEMBLY


    1. Check that the operation of the shift indicator on the combination meter assembly.

      OK
      The shift indicator on the combination meter assembly operates normally.
      Result
      Proceed to
      OK
      NG

    NG

    GO TO METER / GAUGE SYSTEM Click here

    OK

  6. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table Click here.

      Result
      Result Proceed to
      Fault not listed in problem symptoms table A
      Fault listed in problem symptoms table B

    B

    GO TO STEP 8 Click here

    A

  7. OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Terminals of ECU Click here

    2. Operation Check Click here

    3. Data List / Active Test Click here

      Result
      Result
      NEXT

    NEXT

  8. REPAIR OR REPLACE

    Result
    Result
    NEXT

    NEXT

  9. CONFIRMATION TEST

    Result
    Result
    NEXT

    NEXT

    END