INSTRUMENT PANEL SAFETY PAD REASSEMBLY

Click here

PROCEDURE

1. Click here

   INSTALL NO. 1 INSTRUMENT PANEL BRACKET

   
   
   1. 

      Install the No. 1 instrument panel bracket with the 4 screws <E>.

2. Click here

   INSTALL NO. 2 INSTRUMENT PANEL BRACKET

   
   
   1. 

      Install the No. 2 instrument panel bracket with the 2 screws <E>.

3. Click here

   INSTALL NO. 1 INSTRUMENT PANEL PIN

   
   
   1. 

      Install the 4 No. 1 instrument panel pins with the 4 screws <E>.

4. Click here

   INSTALL NO. 2 SIDE DEFROSTER NOZZLE

   
   
   1. 

      Engage the 4 claws to install the No. 2 side defroster nozzle.

5. Click here

   INSTALL NO. 1 SIDE DEFROSTER NOZZLE

   
   
   1. 

      Engage the 4 claws to install the No. 1 side defroster nozzle.

6. Click here

   INSTALL NO. 1 ION GENERATOR BRACKET (w/ Ion Generator)

   
   
   1. 

      Install the No. 1 ion generator bracket with the 2 screws <D>.

7. Click here

   INSTALL NO. 2 ION GENERATOR BRACKET (w/ Ion Generator)

   
   
   1. 

      Install the No. 2 ion generator bracket and No. 6 heater to register duct with the screw <D>.

8. Click here

   INSTALL NO. 3 INSTRUMENT PANEL WIRE

   
   

   1. for LHD:

      
      
      1. 

         Engage the 6 clamps to install the No. 3 instrument panel wire.

   2. for RHD:

      
      
      1. 

         Engage the 5 clamps to install the No. 3 instrument panel wire.

9. Click here

   INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

   Click here

10. Click here

    INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)

    Click here

11. Click here

    INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)

    Click here

12. Click here

    INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

    Click here

13. Click here

    INSTALL NO. 3 HEATER TO REGISTER DUCT

    
    
    1. 

       Install the No. 3 heater to register duct with the 3 screws <D>.

14. Click here

    INSTALL NO. 1 HEATER TO REGISTER DUCT

    
    

    1. w/o Ion Generator:

       
       
       1. 

          Install the No. 1 heater to register duct with the 3 screws <D>.

    2. w/ Ion Generator:

       
       
       1. 

          Engage the No. 1 heater to register duct assembly to the No. 6 heater to register duct to install it.

       2. Install the 3 screws <D>.

15. Click here

    INSTALL DEFROSTER NOZZLE ASSEMBLY

    
    
    1. 

       Install the defroster nozzle assembly with the 3 screws <D>.

16. Click here

    INSTALL NO. 1 DEFROSTER NOZZLE GARNISH

    
    
    1. 

       Engage the 8 guides and 9 claws to install the No. 1 defroster nozzle garnish as shown in the illustration.

17. Click here

    INSTALL AUTOMATIC LIGHT CONTROL SENSOR

    Click here

18. Click here

    INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

    
    
    1. 

       Engage the 2 claws.

    2. Install the No. 2 side defroster nozzle duct with the screw <D>.

19. Click here

    INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT

    
    
    1. 

       Engage the 2 claws.

    2. Install the No. 1 side defroster nozzle duct with the screw <D>.