PROCEDURE
INSTALL RADIO RECEIVER ASSEMBLY
INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)
INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)
INSTALL HARD DISK DRIVE (w/ Navigation System)
w/ G-BOOK System: Click here
INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)
INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)
INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Navigation System)
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL LUGGAGE TRIM SERVICE HOLE COVER (w/ Navigation System)
INSPECT HARD DISK DRIVE (w/ Navigation System)
w/ G-BOOK System: Click here
REPLACED OPERATION (w/ Parking Assist Monitor System)
w/o Parallel Parking Assist Function: Click here
w/ Parallel Parking Assist Function: Click here
CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)