CENTER AIRBAG SENSOR ASSEMBLY ON-VEHICLE INSPECTION

Click here Click here

CAUTION / NOTICE / HINT

Click here

PROCEDURE

1. Click here

   INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle not Involved in Collision)

   
   

   1. Perform a diagnostic system check (Click here).

2. Click here

   INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

   
   

   1. Perform a diagnostic system check (Click here).

   2. Visually check for defects with the airbag sensor assembly installed on the vehicle.

      
      

      1. The defects are as follows:

         
         

         • Cracks on the sensor housing

         • Dents on the sensor housing

         • Chips on the sensor housing

         • Cracks or other damage to the connector

         • Peeling of the label

         OK
         No defects are found.

         If any defects are found, replace the airbag sensor assembly with a new one.

3. Click here

   INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag is Deployed)

   
   

   1. Replace the airbag sensor assembly.

      Tip:

      The airbag sensor assembly should be replaced after any of the airbags has deployed, as it has been subjected to an impact.