REAR SEAT SIDE AIRBAG ASSEMBLY ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)

   
   

   1. Perform a diagnostic system check Click here.

   2. Visually check for defects with the rear seat airbag assemblies installed on the vehicle.

      Tech Tips

      The defects are as follows:

      
      

      • Scratches, broken or frayed threads on the surface of the rear seatback assembly around the rear seat airbag assemblies

      • Small cracks on the rear seatback assembly around the rear seat airbag assemblies

      • Significant discoloration on the rear seatback assembly around the rear seat airbag assemblies

      OK
      No defects are found.

      If any defects are found, replace the bench type rear seatback pad or bench type rear seatback cover with a new one.

2. INSPECT REAR SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

   
   

   1. Perform a diagnostic system check Click here.

   2. Visually check for defects with the rear seat airbag assemblies removed from the vehicle.

      Tech Tips

      The defects are as follows:

      
      

      • Scratches, broken or frayed threads on the surface of the rear seat airbag assemblies base fabric

      • Marks from being dropped

      • Deformation on the installation part of the rear seat airbag assemblies

      • Cracks or other damage to the wire harness or connector

      OK
      No defects are found.

      If any defects are found, replace the rear seat airbag assembly with a new one.