Click here

AIRBAG SYSTEM, Diagnostic DTC:B1615/14

Click here
Click here Click here
DTC Code DTC Name
B1615/14 Front Airbag Sensor LH Malfunction
Click here

DESCRIPTION

The front airbag sensor LH circuit consists of the airbag sensor assembly and front airbag sensor LH.

The front airbag sensor LH detects impacts to the vehicle and sends signals to the airbag sensor assembly to determine if the airbags and pretensioners should be deployed.

DTC B1615/14 is stored when a malfunction is detected in the front airbag sensor LH.

DTC No. DTC Detection Condition Trouble Area
B1615/14

  • Front airbag sensor LH malfunction

  • Airbag sensor assembly malfunction

  • Front airbag sensor LH

  • Airbag sensor assembly
Click here

WIRING DIAGRAM

(Click here)

Click here

CAUTION / NOTICE / HINT

Note:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work (Click here).

Click here

PROCEDURE


  1. Click here

    CHECK FRONT AIRBAG SENSOR LH


    1. A0006JEE02

      Turn the power switch off.

    2. Disconnect the cable from the negative (-) auxiliary battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

    3. Interchange the front airbag sensor LH with RH and connect the connectors.

    4. Connect the cable to the negative (-) auxiliary battery terminal.

    5. Clear the DTCs stored in memory (Click here).

    6. Turn the power switch off.

    7. Turn the power switch on (IG), and wait for at least 60 seconds.

    8. Check for DTCs (Click here).

      Result
      Result Proceed to
      DTCs B1610/13 and B1615/14 are not output. A
      DTC B1615/14 is output. B
      DTC B1610/13 is output. C
      Tip:

      Codes other than DTCs B1610/13 and B1615/14 may be output at this time, but they are not related to this check.

    9. Turn the power switch off.

    10. Disconnect the cable from the negative (-) auxiliary battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

    11. Return the front airbag sensor LH and RH to their original positions and connect the connectors.

      Table 1. Text in Illustration
      *1 Front Airbag Sensor RH
      *2 Airbag Sensor Assembly