CLOCK REMOVAL

PROCEDURE

1. Click here

   CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

   
   

   1. Disable the auto away/return function by changing the customize parameter (Click here).

      Note:

      Record the current customize parameter setting (whether the auto away/return function is enabled or disabled) in order to restore the current setting after finishing this operation.

      Tip:

      Performing the above operation disables the auto away/return function when the power switch is turned off.

   2. Turn the power switch on (IG). Operate the tilt and telescopic switch to fully extend and lower the steering column assembly.

   3. Turn the power switch off.

2. Click here

   REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

3. Click here

   REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

   Click here

4. Click here

   REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

5. Click here

   REMOVE CLOCK ASSEMBLY

   
   
   1. 

      Disengage the 4 claws and remove the clock assembly.