Click here

METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS

Click here
Click here

PROCEDURE


  1. Click here

    CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Warning, Display.

      5. Select the setting by referring to the table below.

        Note:

        • Be sure to record the current value before customizing.

        Table 1. Warning
        Tester Display Default Content Setting Relevant ECU
        Flasher Sound Volume Adjustment Medium Function to change the flasher sound volume Medium, Small, Large Combination meter assembly
        Lane Change Flashing Times Setting 3 Function to change the lane change flashing times OFF, 3, 4, 5, 6, 7 Combination meter assembly
        Table 2. Display
        Tester Display Default Content Setting Relevant ECU
        ODO Display Time After IG OFF Setting 30s Function to change the ODO display time after power switch is turned off 30s, 60s, 600s, OFF Combination meter assembly