Click here

RELAY ON-VEHICLE INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT PANEL RELAY


    1. A01W1HWE34

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω
      Table 1. Text in Illustration
      *a

      Component without harness connected

      (PANEL Relay)

      If the result is not as specified, replace the PANEL relay.