AMBIENT LIGHT(for Instrument Panel Side) INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY

   
   
   1. 

      Insert the interior illumination light sub-assembly in the direction indicated by the arrow in the illustration.

   2. Engage the 2 claws.

   3. 

      Connect the instrument panel finish panel with the screw (B).

      Table 1. Text in Illustration

      *1	Instrument Panel Finish Panel

   4. Engage the pin to install the lower instrument cluster finish garnish with the 2 screws (A).

   5. Engage the 13 guides to connect the wire harness of the interior illumination light sub-assembly.

   6. Install the 4 adhesive tapes.

2. Click here

   INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

   Click here

3. Click here

   INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here