Click here

AMBIENT LIGHT(for Instrument Panel Side) REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  2. Click here

    REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  3. Click here

    REMOVE INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY


    1. A01W0VE

      Remove the 4 pieces of adhesive tape.

    2. A01W012

      Disengage the 13 guides and disconnect the wire harness of the interior illumination light sub-assembly.

    3. A01W2P9E01

      Remove the 2 screws (A).

      Table 1. Text in Illustration
      *1 Instrument Panel Finish Panel

    4. Disengage the pin and remove the lower instrument cluster finish garnish.

    5. Remove the screw (B) and turn back the instrument panel finish panel to a position where the interior illumination light sub-assembly can be removed.

    6. A01W20N

      Disengage the 2 claws.

    7. A01W4U2

      Slide the interior illumination light sub-assembly in the direction indicated by the arrow in the illustration to remove it.