FOOTWELL LIGHT(for Rear Side) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH


    1. A0007HQE23
      Text in Illustration
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly LH)

      Connect a positive (+) lead from the auxiliary battery to terminal 2 (B) and a negative (-) lead to terminal 1 (E).

    2. Check that the No. 1 interior illumination light assembly LH comes on.

      OK
      No. 1 interior illumination light assembly LH comes on.

      If the result is not as specified, replace the No. 1 interior illumination light assembly LH.

  2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH


    1. A0007HQE23
      Text in Illustration
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly RH)

      Connect a positive (+) lead from the auxiliary battery to terminal 2 (B) and a negative (-) lead to terminal 1 (E).

    2. Check that the No. 1 interior illumination light assembly RH comes on.

      OK
      No. 1 interior illumination light assembly RH comes on.

      If the result is not as specified, replace the No. 1 interior illumination light assembly RH.