SPOT LIGHT INSPECTION

Click here

PROCEDURE

1. Click here

   INSPECT INNER REAR VIEW MIRROR ASSEMBLY

   
   
   1. 

      Inspect the spot light.

      Table 1. Text in Illustration

      *1	Forward Sensor	*2	Black Colored Tape
      *3	Spot Light	-	-
      *a	Component without harness connected (Inner Rear View Mirror Assembly)	-	-

      
      

      1. Attach black colored tape to the forward sensor to prevent it from sensing.

      2. Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.

      3. Check that the spot light comes on.

         Standard
         Spot light comes on.

         If the result is not as specified, replace the inner rear view mirror assembly.