GLOVE BOX LIGHT INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL GLOVE BOX LIGHT ASSEMBLY

   
   
   1. 

      Lift and turn the glove box light assembly in the direction indicated by the arrow shown in the illustration to install it.

2. Click here

   INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

3. Click here

   INSTALL INSTRUMENT PANEL BOX DOOR COVER

   Click here

4. Click here

   INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

5. Click here

   INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. Click here

   INSTALL INSTRUMENT SIDE PANEL RH

   Click here

7. Click here

   INSTALL FRONT DOOR OPENING TRIM COVER RH

   Tip:

   Use the same procedure as for the LH side (Click here).

8. Click here

   INSTALL COWL SIDE TRIM BOARD RH

   Tip:

   Use the same procedure as for the LH side (Click here).

9. Click here

   INSTALL FRONT DOOR SCUFF PLATE RH

   Tip:

   Use the same procedure as for the LH side (Click here).

10. Click here

    INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

11. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

12. Click here

    INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

13. Click here

    INSPECT SRS WARNING LIGHT

    (Click here)