SECURITY HORN ASSEMBLY REMOVAL

PROCEDURE

1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

   Click here

2. REMOVE SPARE WHEEL COVER PAD LH

   Click here

3. REMOVE SPARE WHEEL COVER PAD RH

   Click here

4. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)

   Click here

5. REMOVE REAR FLOOR FINISH PLATE

   Click here

6. REMOVE LUGGAGE COMPARTMENT FRONT TRIM COVER

   Click here

7. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

   Click here

8. REMOVE ROPE HOOK (for RH Side)

   Click here

9. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/o Power Trunk Lid System)

   Click here

10. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Power Trunk Lid System)

    Click here

11. REMOVE SECURITY HORN ASSEMBLY

    
    

    1. 

       Remove the 2 nuts.

    2. Disconnect the connector and remove the security horn assembly.