ELECTRICAL KEY OSCILLATOR(for Front Floor) INSTALLATION

PROCEDURE

1. Click here

   INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. Engage the clamp to install the No. 1 indoor electrical key antenna assembly.

      Note:

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

   2. Connect the connector.

2. Click here

   INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

3. Click here

   INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

4. Click here

   INSTALL CONSOLE PANEL SUB-ASSEMBLY

   Click here

5. Click here

   INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

   Click here