ELECTRICAL KEY OSCILLATOR(for Front Floor) REMOVAL

PROCEDURE

1. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

   Click here

2. REMOVE CONSOLE PANEL SUB-ASSEMBLY

   Click here

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

5. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. 

      Disconnect the connector.

   2. Disengage the clamp and remove the No. 1 indoor electrical key antenna assembly.

      Note

      Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.