ELECTRICAL KEY OSCILLATOR(for Luggage Compartment) INSTALLATION

Info Added 2017-08-02

PROCEDURE


  1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Engage the clamp to install the No. 1 indoor electrical key antenna assembly.

      Note

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

    2. Connect the connector.

  2. INSTALL FRONT NO. 1 LUGGAGE COMPARTMENT TRIM COVER


    1. A0007U4E01
      Text in Illustration
      *A Double-sided Tape Size
      *a Guide of Application Area
      A0007SL Double-sided Tape

      Peel off the release paper from new double-sided tape, and apply the new double-sided tape to the position indicated in the illustration. Be careful not to touch the adhesive surface.

      Standard Dimension
      Area Dimension
      a 3.0 mm (0.118 in.)
      b 15.0 mm (0.591 in.)

    2. Engage the 2 fasteners and attach the double-sided tape to install the front No. 1 luggage compartment trim cover.

    3. Install the 2 clips.

  3. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/o Power Trunk Lid System)

    Click here

  4. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Power Trunk Lid System)

    Click here

  5. INSTALL ROPE HOOK (for RH Side)

    Click here

  6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

    Click here

  7. INSTALL LUGGAGE COMPARTMENT FRONT TRIM COVER

    Click here

  8. INSTALL REAR FLOOR FINISH PLATE

    Click here

  9. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)

    Click here

  10. INSTALL SPARE WHEEL COVER PAD RH

    Click here

  11. INSTALL SPARE WHEEL COVER PAD LH

    Click here

  12. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here