THEFT DETERRENT SYSTEM, Diagnostic DTC:B2761

DTC Code DTC Name
B2761 Intrusion Sensor Internal Circuit Malfunction

DESCRIPTION


DTC No. DTC Detection Condition Trouble Area
B2761 Intrusion sensor (theft warning ultrasonic sensor) outputs signal for sensor malfunction
  • Intrusion sensor (theft warning ultrasonic sensor) (roof console box assembly)

  • Main body ECU (multiplex network body ECU)

CAUTION / NOTICE / HINT

Note

If the main body ECU (multiplex network body ECU) is replaced, refer to Service Bulletin.

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Turn the power switch on (IG), then off.

    3. Set the theft deterrent system to "ARMED STATE".

    4. Check that the security indicator changes from illuminated to blinking.

    5. Set the theft deterrent system to "DISARMED STATE".

    6. Check for DTCs Click here.

      OK
      DTC B2761 is not output.

    OK
    NG
  2. REPLACE INTRUSION SENSOR (THEFT WARNING ULTRASONIC SENSOR) (ROOF CONSOLE BOX ASSEMBLY)


    1. Replace the intrusion sensor (theft warning ultrasonic sensor) (roof console box assembly) Click here.


    NEXT
  3. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Turn the power switch on (IG), then off.

    3. Set the theft deterrent system to "ARMED STATE".

    4. Check that the security indicator changes from illuminated to blinking.

    5. Set the theft deterrent system to "DISARMED STATE".

    6. Check for DTCs Click here.

      OK
      DTC B2761 is not output.

    OK
    NG