DOOR CONTROL RECEIVER(for Quarter) REMOVAL

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY

   Click here

2. REMOVE REAR DOOR SCUFF PLATE LH

   Click here

3. REMOVE REAR DOOR SCUFF PLATE RH

   Click here

4. REMOVE REAR SEAT SIDE GARNISH LH

   Click here

5. REMOVE REAR SEAT SIDE GARNISH RH

   Click here

6. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

   Click here

7. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

   Click here

8. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

   Click here

9. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

   Click here

10. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click here

11. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

    Click here

12. REMOVE CENTER STOP LIGHT SET (w/o Rear Sunshade)

    Click here

13. REMOVE REAR SEAT SHOULDER BELT HOLE COVER

    Click here

14. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER

    Click here

15. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

    Click here

16. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

    Click here

17. REMOVE DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY (for Separate Type Tire Pressure Warning System)

    
    

    1. 

       Remove the 2 bolts.

    2. Disengage the 2 guides from the holes to remove the door control and tire pressure monitoring system receiver assembly.

    3. Disconnect the connector from the door control and tire pressure monitoring system receiver assembly.