FRONT DOOR LOCK INSPECTION

PROCEDURE

1. Click here

   INSPECT FRONT DOOR LOCK ASSEMBLY LH

   
   
   1. 

      Check the operation of the door lock motor.

      
      

      1. Apply auxiliary battery voltage and check the operation of the door lock motor.

         OK
         Connection Result Auxiliary battery positive (+) → Terminal 4 (L) Auxiliary battery negative (-) → Terminal 1 (UL) Locks Auxiliary battery positive (+) → Terminal 1 (UL) Auxiliary battery negative (-) → Terminal 4 (L) Unlocks

         Table 1. Text in Illustration

         *a	Component without harness connected (Front Door Lock Assembly LH)
         *b	Unlock
         *c	Lock

         If the result is not as specified, replace the front door lock assembly LH.

   2. 

      Check the operation of the door unlock detection switch.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 7 (E) - 8 (LSSR) Locked 10 kΩ or higher 7 (E) - 8 (LSSR) Unlocked Below 1 Ω

         Table 2. Text in Illustration

         *a	Component without harness connected (Front Door Lock Assembly LH)
         *b	Unlock
         *c	Lock

         If the result is not as specified, replace the front door lock assembly LH.

   3. 

      Check the operation of the door key lock and unlock switch.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 9 (L) - 7 (E) Held to lock side Below 1 Ω 9 (L) - 7 (E) Neutral or held to unlock side 10 kΩ or higher 10 (UL) - 7 (E) Held to unlock side Below 1 Ω 10 (UL) - 7 (E) Neutral or held to lock side 10 kΩ or higher

         Table 3. Text in Illustration

         *a	Component without harness connected (Front Door Lock Assembly LH)
         *b	Unlock
         *c	Lock

         If the result is not as specified, replace the front door lock assembly LH.

2. Click here

   INSPECT FRONT DOOR LOCK ASSEMBLY RH

   
   
   1. 

      Check the operation of the door lock motor.

      
      

      1. Apply auxiliary battery voltage and check the operation of the door lock motor.

         OK
         Connection Result Auxiliary battery positive (+) → Terminal 4 (L) Auxiliary battery negative (-) → Terminal 1 (UL) Locks Auxiliary battery positive (+) → Terminal 1 (UL) Auxiliary battery negative (-) → Terminal 4 (L) Unlocks

         Table 4. Text in Illustration

         *a	Component without harness connected (Front Door Lock Assembly RH)
         *b	Unlock
         *c	Lock

         If the result is not as specified, replace the front door lock assembly RH.

   2. 

      Check the operation of the door unlock detection switch.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 7 (LSSR) - 8 (E) Locked 10 kΩ or higher 7 (LSSR) - 8 (E) Unlocked Below 1 Ω

         Table 5. Text in Illustration

         *a	Component without harness connected (Front Door Lock Assembly RH)
         *b	Unlock
         *c	Lock

         If the result is not as specified, replace the front door lock assembly RH.