DOOR CONTROL RECEIVER(for Quarter) INSTALLATION

PROCEDURE


  1. INSTALL DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY


    1. Connect the connector to the door control and tire pressure monitoring system receiver assembly.

    2. A0008KUE01
      Text in Illustration
      *1 Wire Harness
      *2 Bracket of the Door Control and Tire Pressure Monitoring System Receiver Assembly

      Engage the 2 tabs into the holes to temporarily install the door control and tire pressure monitoring system receiver assembly.

    3. Install the 2 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      Make sure that the wire harness is positioned in front of the bracket of the door control and tire pressure monitoring system receiver assembly as shown in the illustration.

  2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

    Click here

  3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

    Click here

  4. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER

    Click here

  5. INSTALL REAR SEAT SHOULDER BELT HOLE COVER

    Click here

  6. INSTALL CENTER STOP LIGHT SET (w/o Rear Sunshade)

    Click here

  7. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click here

  8. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH

    Click here

  9. CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Click here

  10. CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    Click here

  11. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

    Click here

  12. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

    Click here

  13. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

  14. INSTALL REAR SEAT SIDE GARNISH RH

    Click here

  15. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  16. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

  17. INSTALL REAR SEAT ASSEMBLY

    Click here