BLIND SPOT MONITOR MAIN SWITCH INSTALLATION

PROCEDURE

1. INSTALL BLIND SPOT MONITOR MAIN SWITCH ASSEMBLY (WARNING CANCELING SWITCH ASSEMBLY)

   
   

   1. Engage the 2 claws to install the blind spot monitor main switch assembly (warning canceling switch assembly).

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

4. INSTALL INSTRUMENT SIDE PANEL LH

   Click here

5. INSTALL FRONT DOOR OPENING TRIM COVER LH

   Click here

6. INSTALL COWL SIDE TRIM BOARD LH

   Click here

7. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here

8. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

   Click here