BLIND SPOT MONITOR MAIN SWITCH REMOVAL

Click here

PROCEDURE

1. Click here

   REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

   Click here

2. Click here

   REMOVE FRONT DOOR SCUFF PLATE LH

   Click here

3. Click here

   REMOVE COWL SIDE TRIM BOARD LH

   Click here

4. Click here

   REMOVE FRONT DOOR OPENING TRIM COVER LH

   Click here

5. Click here

   REMOVE INSTRUMENT SIDE PANEL LH

   Click here

6. Click here

   DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

7. Click here

   REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

8. Click here

   REMOVE BLIND SPOT MONITOR MAIN SWITCH ASSEMBLY (WARNING CANCELING SWITCH ASSEMBLY)

   
   

   1. for LHD:

      
      
      1. 

         Disengage the 2 claws and remove the blind spot monitor main switch assembly (warning canceling switch assembly).

   2. for RHD:

      
      
      1. 

         Disengage the 2 claws and remove the blind spot monitor main switch assembly (warning canceling switch assembly).