Click here

ULTRASONIC SENSOR(for Rear Side) REMOVAL

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE REAR BUMPER ASSEMBLY

    (Click here)

  2. Click here

    REMOVE ULTRASONIC SENSOR WITH CLIP


    1. A0004NRE02

      Disconnect the connector and disengage the clamp.

      Table 1. Text in Illustration
      *A Corner LH Side
      *B Other Side
    2. A0007WXE07

      Disengage the 2 claws and remove the ultrasonic sensor with clip.

      Table 2. Text in Illustration
      *A Corner LH Side
      *B Other Side
  3. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

    Tip:

    Perform this step only when necessary.


    1. A0007NP

      Remove the 2 No. 1 ultrasonic sensor retainers.

      Tip:

      Use the same procedure for all No. 1 ultrasonic sensor retainers.

    2. Remove the old double-sided tape from the rear bumper assembly.

  4. Click here

    REMOVE ULTRASONIC SENSOR CLIP


    1. A0007TB

      Disengage the claw and remove the ultrasonic sensor clip.

      Tip:

      Use the same procedure for all ultrasonic sensor clips.

  5. Click here

    REMOVE NO. 1 ULTRASONIC SENSOR