CLEARANCE WARNING BUZZER INSTALLATION

PROCEDURE

1. INSTALL NO. 1 CLEARANCE WARNING BUZZER

   
   

   1. Engage the clamp to install the No. 1 clearance warning buzzer.

   2. Connect the connector.

2. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

   Click here

3. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET (for Multi-Media Module Receiver Type)

   Click here

4. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

   Click here

5. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

   Click here

7. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (for Multi-Media Module Receiver Type)

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

9. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for Multi-Media Module Receiver Type)

   Click here

10. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here