Click here

PARKING ASSIST MONITOR SYSTEM(w/o Parallel Parking Assist Function) INITIALIZATION

Click here
Click here
Click here

  1. INITIALIZE PARKING ASSIST MONITOR SYSTEM


    1. If estimated course lines are not displayed on the image of the area behind the vehicle, perform the following procedure to correct the steering angle neutral point.


      1. Fully turn the steering wheel to the right and left on flat ground.

        Note:

        Memorizing the steering angle neutral point must be carried out with the power switch on (READY). Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.

        Tip:

        If estimated course lines are not displayed on the image of the area behind the vehicle with the steering wheel fully turned to the right or left, perform "Steering Angle Setting in Calibration" (Click here)