FRONT EVAPORATOR TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL EVAPORATOR TEMPERATURE SENSOR (NO. 1 COOLER THERMISTOR)


    1. A0007SDE13
      Text in Illustration
      *a Fixed Part
      *b Sensor Part

      Install the evaporator temperature sensor (No. 1 cooler thermistor) as shown in the illustration.

      Part Length
      A 34.3 mm 1.35 in.
      B 20.9 mm 0.823 in.
      C 50.0 mm 1.97 in.

      Note


      • Be sure to insert the thermistor only once because reinserting it into the same position will not allow it to be firmly secured.

      • When reusing the evaporator, insert the thermistor one row next to the one that has been used previously (X in the illustration).

      • After inserting the thermistor, do not apply excessive force to the wire.

      • Directly insert the thermistor until the edge of plastic case "a" comes into contact with evaporator "b".

  2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

    Click here

  3. INSTALL COOLER EXPANSION VALVE

    Click here

  4. INSTALL HEATER PACKING

    Click here

  5. INSTALL AIR CONDITIONING HARNESS ASSEMBLY

    Click here

  6. INSTALL BLOWER ASSEMBLY

    for LHD: Click here

    for RHD: Click here

  7. INSTALL AIR CONDITIONING UNIT ASSEMBLY

    Click here