ROOM TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR

   
   

   1. Connect the cooler thermistor hose and connector.

   2. Engage the 2 claws to install the cooler (room temp. sensor) thermistor.

2. INSTALL SWITCH BASE

   Click here

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

   Click here

4. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

5. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

6. INSTALL INSTRUMENT SIDE PANEL LH

   Click here

7. INSTALL FRONT DOOR OPENING TRIM COVER LH

   Click here

8. INSTALL COWL SIDE TRIM BOARD LH

   Click here

9. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here

10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

11. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

12. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here