CONDENSER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  3. REMOVE LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  6. REMOVE FRONT BUMPER ENERGY ABSORBER

    Click here

  7. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

    Click here

  8. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  9. REMOVE NO. 5 INVERTER BRACKET

    Click here

  10. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  11. REMOVE HOOD LOCK ASSEMBLY (for LHD)

    Click here

  12. REMOVE HOOD LOCK ASSEMBLY (for RHD)

    Click here

  13. REMOVE UPPER RADIATOR SUPPORT

    Click here

  14. REMOVE HOOD LOCK SUPPORT SUB-ASSEMBLY


    1. A000894

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the bolt and hood lock support sub-assembly.

  15. REMOVE RADIATOR SIDE DEFLECTOR RH

    Click here

  16. REMOVE RADIATOR SIDE DEFLECTOR LH


    1. A0006OC

      Disengage the 3 claws and guide to remove the radiator side deflector LH.

  17. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A000638

      Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  18. DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY


    1. A0007GQ

      Remove the bolt and disconnect the air conditioner tube and accessory assembly from the cooler condenser assembly.

    2. Remove the O-ring from the air conditioner tube and accessory assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  19. REMOVE COOLER CONDENSER ASSEMBLY


    1. A0003XW

      Remove the 4 bolts.

    2. A0008W9

      Pull the radiator assembly in the direction indicated by the arrow.

    3. A0007Q4

      Remove the 2 bolts.

    4. A00063H

      Remove the cooler condenser assembly as shown in the illustration.