CONDENSER ON-VEHICLE INSPECTION

PROCEDURE

1. Click here

   INSPECT COOLER CONDENSER ASSEMBLY

   
   

   1. If the cooler condenser assembly fins are dirty, clean them with water and dry them with compressed air.

      Note:

      Do not damage the cooler condenser assembly fins.

   2. If any cooler condenser assembly fins are bent, straighten them using a screwdriver or pliers.

2. Click here

   INSPECT FOR REFRIGERANT LEAK

   
   

   1. Using a halogen leak detector, check pipe joints for refrigerant leaks.

   2. If a refrigerant leak is detected in a joint, check the torque of the joint.