LEXUS PARKING ASSIST-SENSOR SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. Click here

   CUSTOMIZE LEXUS PARKING ASSIST-SENSOR SYSTEM

   
   

   1. Customizing with the GTS

      Note:
      

      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the clearance sonar main switch on.

      4. Turn the GTS on.

      5. Enter the following menus: Body Electrical / Clearance Sonar / Utility / Customize Setting.

      6. Select the setting by referring to the table below.

         Table 1. Warning

         Display	Default	Content	Setting	Relevant ECU
         Fr Sensor Onset Range	Wide	Sets the detection operation range for the front center sensors.	Narrow*1 or Wide*3	Clearance warning ECU assembly
         Rr Sensor Onset Range	Wide	Sets the detection operation range for the rear center sensors.	Narrow*2 or Wide*4	Clearance warning ECU assembly
         Keep Sense Buzzer	Avail	Sounds the buzzer when the distance between the vehicle and obstacle does not change for more than 3 seconds.	Not Avail or Avail Not Avail: Not Available Avail: Available	Clearance warning ECU assembly
         Fr & Rr Buzzer Volume	M2	Changes the buzzer volume setting.	L, M1, M2, M3 or H L: Low volume M1: Medium low volume M2: Medium volume M3: Medium high volume H: High volume	Clearance warning ECU assembly
         Temporary Mute Reset Speed Adjust	20 km/h	Sets the vehicle speed at which the temporary mute function resets.	00: System Link, 01: 15 km/h, 10: 20 km/h, 11: 30 km/h	Clearance warning ECU assembly
         Temporary Mute Function	ON	Sets the availability of the temporary mute function.	0: OFF,1: ON	Clearance warning ECU assembly

         Table 2. Sensor

         Display	Default	Content	Setting	Relevant ECU
         Sensor Condition N	Avail	Makes the front sensors available when the shift lever is in N.	Not Avail or Avail Not Avail: Not Available Avail: Available	Clearance warning ECU assembly
         Reverse Range Front Sensor	Fcrn	Changes the operation setting for the front sensors when the shift lever is in R.	F, Fcrn or F Stop F: All front sensors are available Fcrn: Front corner sensors are available F Stop: All Front sensors are not available	Clearance warning ECU assembly
         Non P/R Range Rear Sensor	R Stop	Changes the operation setting for the rear sensors when the shift lever is in any position other than P or R.	R, Rcrn or R Stop R: All rear sensors are available Rcrn: Rear corner sensors are available R Stop: All rear sensors are not available	Clearance warning ECU assembly

         Table 3. Display

         Display	Default	Content	Setting	Relevant ECU
         Display Mode	All	The display mode setting (when the LEXUS parking assist-sensor system is normal).	All or Undisp	Clearance warning ECU assembly

         
         

         • *1: Detection range of 500 mm (19.7 in.)

         • *2: Detection range of 600 mm (23.6 in.)

         • *3: Detection range of 1000 mm (39.4 in.)

         • *4: Detection range of 1500 mm (59.1 in.)

   2. Customizing with Multi-display Assembly

      Note:
      

      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.

      
      

      1. Turn the power switch on (IG).

      2. Turn the clearance sonar main switch on.

      3. Enter the following menus: Setup / Vehicle / LEXUS park assist.

      4. Select the setting by referring to the table below.

         Table 4. for Navigation System

         Display	Default	Content	Setting	Relevant ECU
         Alert volume	3	Sets the buzzer alert volume.	1, 2, 3, 4 or 5 1: Low volume 2: Medium low volume 3: Medium volume 4: Medium high volume 5: High volume	Clearance warning ECU assembly
         Display	Indicator of Display Off not illuminated*1	The display mode setting (when the LEXUS parking assist-sensor system is normal).	Indicator of Display Off not illuminated*1 or indicator of Display Off illuminated*2	Clearance warning ECU assembly
         Distance Front	Green*4	Sets the detection operation range for the front center sensors.	Orange*3 or Green*4	Clearance warning ECU assembly
         Distance Rear	Green*5	Sets the detection operation range for the rear center sensors.	Orange*3 or Green*5	Clearance warning ECU assembly

         Table 5. for Audio and Visual System

         Display	Default	Content	Setting	Relevant ECU
         Alert volume	Level 3	Sets the buzzer alert volume.	Level 5, Level 4, Level 3, Level 2 or Level 1	Clearance warning ECU assembly
         Sonar Display	On	The display mode setting (when the LEXUS parking assist-sensor system is normal).	On or Off	Clearance warning ECU assembly
         Front Sonar Distance	Green*4	Sets the detection operation range for the front center sensors.	Orange*3 or Green*4	Clearance warning ECU assembly
         Rear Sonar Distance	Green*5	Sets the detection operation range for the rear center sensors.	Orange*3 or Green*5	Clearance warning ECU assembly

         
         

         • *1: Sonar indication is available on the multi-display

         • *2: Sonar indication is not available on the multi-display

         • *3: Detection range of 600 mm (23.6 in.)

         • *4: Detection range of 1000 mm (39.4 in.)

         • *5: Detection range of 1500 mm (59.1 in.)