TELEMATICS SYSTEM OPERATION CHECK


  1. MANUAL MAINTENANCE CHECK

    Tech Tips


    • Using the manual maintenance check, it is possible to perform a maintenance check of the G-BOOK device (inspection or repair of the device, or maintenance check after vehicle repair). Confirm if the customer is a registered member (when applying for or canceling the service, or changing the contract details). It is also possible to enable or disable the emergency call service.

    • The screen illustrations provided are samples only and may be different from actual screens.


    1. Check GPS Reception


      1. Check that the GPS mark is displayed on the present location screen.

        Tech Tips

        The purpose of the manual maintenance check is to confirm that vehicle location information can be sent correctly. Therefore, the manual maintenance check should be performed in a wide-open area where GPS radio waves can be received. Do not perform the check in an area between buildings or in an indoor environment such as a workshop.

    2. Perform Manual Maintenance Check


      1. A0005SN

        Open the emergency call switch panel cover.

      2. Turn the power switch on (ACC) or (IG).

      3. A0007EJ

        Press and hold the emergency call switch immediately after the red and green indicators come on.

      4. A0008SI

        After the manual maintenance check starts, the green indicator will start blinking. Release the emergency call switch immediately after the green indicator starts blinking.

      5. A0009OD

        The system starts accessing the G-BOOK center.

      6. A000645

        After connecting to the G-BOOK center, data communication is first performed to confirm where the vehicle is, that a manual maintenance check is being performed, and that the customer is registered to the G-BOOK center.

      7. A0009OX

        After data communication is completed, the system enters call mode.

      8. A0009BQ

        Try to talk to the G-BOOK center operator through the microphone to confirm that a call can be made normally and the call location is correct.

      9. A0007NJ

        Finish the manual maintenance check after the call to the G-BOOK center operator ends.

      10. Display the present location screen after finishing the manual maintenance check.

      11. A00042X

        Check that the green indicator is illuminated.

        Tech Tips

        If the manual maintenance check cannot be finished normally, perform the inspections indicated by Problem Symptoms Table (performing "The G-BOOK center cannot be accessed even after a manual maintenance check is performed") Click here.

  2. EMERGENCY CALL HISTORY


    1. Enter diagnostic mode Click here.

    2. A00059Q

      Select "Service Information" on the "Service Menu" screen.

    3. A0009BA

      Select "Emergency Call History" on the "Service Information" screen.

    4. A0006Q2E08

      Emergency Call History


      1. Check the call result.

        Display Content
        *a: Type of call Displays the type of call.
        *b: Time and date of call Displays the time and date when a call is made in the form of year/month/day hour:minute.
        *c: Call result

        Displays the result of the communication with the G-BOOK center as follows:


        • "OK": Communication with the center finished normally.

        • "FAIL": Communication with the center did not finish normally.

        • "STOP": Communication with the center was interrupted.

        • "NO CONT": Membership registration has not been performed.

        Tech Tips


        • If "FAIL" is displayed, perform a manual maintenance check and confirm that a call can be made normally.

        • If the manual maintenance check cannot be finished normally, perform the inspections indicated by Problem Symptoms Table (performing "The G-BOOK center cannot be accessed even after a manual maintenance check is performed") Click here.