| DTC Code | DTC Name |
|---|---|
| B15ED | Backup Battery Correspondence Not Detected |
DESCRIPTION
If an incompatible mayday battery is connected to the telematics transceiver, this DTC will be stored.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15ED | The installed mayday battery is not compatible. |
|
CAUTION / NOTICE / HINT
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precautions for G-BOOK (Click here).
PROCEDURE
CHECK DTC
Clear the DTCs (Click here).
Recheck for DTCs and check that no DTCs are output.
| OK |
|---|
| No DTCs are output. |
USE SIMULATION METHOD TO CHECK (Click here)
CONFIRM PART NUMBER (MAYDAY BATTERY)
Check the mayday battery part number.
Check if the part number of the mayday battery installed on the vehicle is correct.
| OK |
|---|
| The mayday battery part number is correct. |
REPLACE MAYDAY BATTERY (Click here)
CONFIRM PART NUMBER (TELEMATICS TRANSCEIVER)
Check the telematics transceiver part number.
Check if the part number of the telematics transceiver installed on the vehicle is correct.
| OK |
|---|
| The telematics transceiver part number is correct. |
REPLACE TELEMATICS TRANSCEIVER (Click here)
REPLACE MAYDAY BATTERY
Replace the mayday battery with a known good one and check if the same DTC is output again (Click here).
Clear the DTCs (Click here).
Recheck for DTCs and check that no DTCs are output.
| OK |
|---|
| No DTCs are output. |
END
REPLACE TELEMATICS TRANSCEIVER (Click here)