| DTC Code | DTC Name |
|---|---|
| B15ED | Backup Battery Correspondence Not Detected |
DESCRIPTION
If an incompatible mayday battery is connected to the telematics transceiver, this DTC will be stored.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15ED | The installed mayday battery is not compatible |
|
CAUTION / NOTICE / HINT
Note
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for G-BOOK Click here.
PROCEDURE
CHECK DTC OUTPUT
Clear the DTCs Click here.
Recheck for DTCs and check that no DTCs are output.
| OK |
|---|
| No DTCs are output. |
| OK |
|
USE SIMULATION METHOD TO CHECK Click here |
| NG |
|
CONFIRM PART NUMBER (MAYDAY BATTERY)
Check the mayday battery part number.
Check if the part number of the mayday battery installed on the vehicle is correct.
| OK |
|---|
| The mayday battery part number is correct. |
| NG |
|
REPLACE MAYDAY BATTERY Click here |
| OK |
|
CONFIRM PART NUMBER (TELEMATICS TRANSCEIVER)
Check the telematics transceiver part number.
Check if the part number of the telematics transceiver installed on the vehicle is correct.
| OK |
|---|
| The telematics transceiver part number is correct. |
| NG |
|
REPLACE TELEMATICS TRANSCEIVER Click here |
| OK |
|
REPLACE MAYDAY BATTERY
Replace the mayday battery with a new one Click here.
| NEXT |
|
CHECK DTC OUTPUT
Clear the DTCs Click here.
Recheck for DTCs and check that no DTCs are output.
| OK |
|---|
| No DTCs are output. |
| OK |
|
END |
| NG |
|
REPLACE TELEMATICS TRANSCEIVER Click here |