HARD DISK DRIVE INSTALLATION

PROCEDURE


  1. PRECAUTION

    Note

    When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

  2. INSTALL HARD DISK DRIVE


    1. A0008QC

      Insert the hard disk drive in the direction shown by the arrow in the illustration to install it.

    2. Install the cover with the 3 screws.

    3. Install the claw with the screw.

  3. INSTALL NO. 2 RADIO BRACKET

    Click here

  4. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET

    Click here

  5. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

  6. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  8. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. INSTALL LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  11. INSPECT HARD DISK DRIVE

    Click here

  12. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here