PROCEDURE
PRECAUTION (w/ G-BOOK System)
Note
When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.
INSTALL RADIO RECEIVER ASSEMBLY
INSTALL HARD DISK DRIVE (w/ G-BOOK System)
INSTALL NO. 2 RADIO BRACKET
Install the No. 2 radio bracket with the 4 screws.
INSTALL NO. 1 RADIO BRACKET
Install the No. 1 radio bracket with the 4 screws.
INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL LUGGAGE TRIM SERVICE HOLE COVER
INSPECT HARD DISK DRIVE (w/ G-BOOK System)
REPLACED OPERATION (w/ Parking Assist Monitor System)
w/ Parallel Parking Assist Function: Click here
w/o Parallel Parking Assist Function: Click here
CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)