NAVIGATION SYSTEM Cursor or Map Rotates when Vehicle Stopped

PROCEDURE

1. Click here

   CHECK CONDITION

   
   
   1. 

      Check with the customer if the vehicle has been turned by a turntable.

      OK
      Vehicle has not been turned by a turntable.

      Tip:

      If the vehicle is turned on a turntable with the power switch on (ACC or IG), the system may store the angular velocity. As a result, the vehicle position cursor may deviate. In this case, the vehicle position cursor will return to normal by turning the power switch off and back to on (ACC or IG) again with the vehicle completely stopped.

   
   
   • OK

     PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)

   • NG

     TURN POWER SWITCH ON (ACC OR IG) WHEN VEHICLE IS COMPLETELY STOPPED