Click here

NAVIGATION SYSTEM, Diagnostic DTC:B157D

Click here
Click here
DTC Code DTC Name
B157D DAB Tuner Antenna Disconnected
Click here

DESCRIPTION

This DTC is stored when the digital audio broadcasting antenna assembly is disconnected or there is a malfunction in the DAB tuner antenna circuit.

DTC No. DTC Detection Condition Trouble Area
B157D Digital audio broadcasting antenna assembly is not connected

  • Antenna cord sub-assembly

  • No. 2 antenna cord sub-assembly

  • No. 3 antenna cord sub-assembly

  • No. 4 antenna cord sub-assembly

  • Digital audio broadcasting antenna assembly

  • Multi-media module receiver assembly
Click here

CAUTION / NOTICE / HINT

Note:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System (Click here).

Click here

PROCEDURE


  1. Click here

    REPLACE ANTENNA CORD SUB-ASSEMBLY


    1. Replace the antenna cord sub-assembly (Click here).

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

  2. Click here

    REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Replace the No. 2 antenna cord sub-assembly (Click here).

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

  3. Click here

    REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY


    1. Replace the No. 3 antenna cord sub-assembly (Click here).

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

  4. Click here

    REPLACE NO. 4 ANTENNA CORD SUB-ASSEMBLY


    1. Replace the No. 4 antenna cord sub-assembly (Click here).

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

  5. Click here

    REPLACE DIGITAL AUDIO BROADCASTING ANTENNA ASSEMBLY


    1. Replace the digital audio broadcasting antenna assembly (Click here).

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    • OK

      END

    • NG

      REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here)