Click here

NAVIGATION SYSTEM, Diagnostic DTC:B1575

Click here
Click here
DTC Code DTC Name
B1575 GVIF Disconnected (from EMV/MM Integrated Device to Multi Display)
Click here

DESCRIPTION

The multi-media module receiver assembly and multi-display assembly are connected via video signal (digital) line.

This DTC is stored when a video signal (digital) line is disconnected.

DTC No. DTC Detection Condition Trouble Area
B1575 Video signal (digital) is lost.

  • Harness and connector

  • Multi-display assembly

  • Multi-media module receiver assembly
Table 1. *a Multi-display Assembly *b Multi-media Module Receiver Assembly *c Video Signal (Digital)
Click here

WIRING DIAGRAM

Click here

CAUTION / NOTICE / HINT

Note:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System (Click here).

Click here

PROCEDURE


  1. Click here

    REPLACE HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - MULTI-DISPLAY ASSEMBLY)


    1. Replace the harness and connector with a new or known good one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

  2. Click here

    REPLACE MULTI-DISPLAY ASSEMBLY


    1. Replace the multi-display assembly with a new or known good one (Click here).

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check that no DTCs are output.

      OK
      No DTCs are output.

    • OK

      END

    • NG

      REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here)