NAVIGATION SYSTEM PRECAUTION

PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

PRECAUTION FOR NAVIGATION SYSTEM

1. If replacing any of the following parts, refer to Initialization of Repair Instruction.

   Click here

   
   

   • Telematics transceiver*

   
   

   • *: w/ Manual (SOS) Switch

PRECAUTIONS FOR SD CARD (DISC PLAYER DISC)

1. The navigation system uses an SD card (disc player disc) containing data such as map data.

2. Precaution for removing the SD card (disc player disc)

   Note:
   

   • The SD card (disc player disc) contains map data and various programs for the navigation system.

     Without the SD card (disc player disc) inserted, the navigation system will not operate normally. Therefore, remove the SD card (disc player disc) only when necessary, such as when updating the map data.

   • After removing the SD card (disc player disc), do not insert any other object into the SD card (disc player disc) slot.

   • When inserting the SD card (disc player disc) into the SD card (disc player disc) slot, make sure that the SD card (disc player disc) is free of foreign matter.

   • After inserting the SD card (disc player disc), make sure that it is securely inserted into the SD card (disc player disc) slot.

   
   

   1. Before removing the SD card (disc player disc), make sure that the power switch is turned off.

3. Precaution for handling the SD card (disc player disc)

   Note:
   

   • 

     Do not touch the terminals with your hand or a metal object.

   • If a strong force is applied to the SD card (disc player disc), it may be damaged.

   • Do not leave a removed SD card (disc player disc) in any of the following areas. If the SD card (disc player disc) is affected adversely, it may result in a malfunction in the navigation system.

   • 
     

     • Places where static electricity or electronic noise is generated.

     • Places which are hot or humid.

     • Places where the SD card (disc player disc) may be exposed to direct sunlight.

     • Places where condensation occurs.

     • Places which objects are prone to corrosion.

   • Do not use the SD card (disc player disc) if the label has peeled off or if a sticker or other label has been attached to it.

PRECAUTIONS FOR RADIO RECEIVER ASSEMBLY (w/ Sound Library Function)

1. A hard disk drive (hard disc) is built into the radio receiver assembly to store music data of the sound library function. Therefore, care must be taken for the following points when handling:

   
   

   1. If it is necessary to replace the radio receiver assembly, be sure to replace it with a new one.

      Note:

      If a used radio receiver assembly is installed as a replacement part, the customer's hard disk drive (hard disc) will not be recognized.

   2. Do not apply any vibration or shock to the radio receiver assembly.

      Note:
      

      • Do not drop or subject the radio receiver assembly to severe impact.

      • Do not use the radio receiver assembly if it has been dropped or subjected to severe impact.

      • Do not store the radio receiver assembly without the hard disk drive (hard disc) installed. (Only remove the hard disk drive (hard disc) from the radio receiver assembly when a replacement radio receiver assembly or hard disk drive (hard disc) is ready.)

   3. Do not remove the radio receiver assembly if there is a risk of condensation occurring inside the unit.

      Note:

      If the temperature of the radio receiver assembly changes rapidly, condensation may occur inside the unit. This may cause a malfunction of the hard disk drive (hard disc). Therefore, when the radio receiver assembly is removed, it is necessary to keep it inside the vehicle or in an environment with an equivalent temperature and humidity.

   4. Take measures to prevent static electricity.

      Note:

      Touching the terminals of a connector can cause static electricity to be transmitted to the internal circuits. This may cause a malfunction of the hard disk drive (hard disc).

   5. Keep the radio receiver assembly away from magnets or magnetized items.

      Note:

      Keep the radio receiver assembly away from speakers, motors, magnetized tools and other magnetic items.

PRECAUTIONS FOR HARD DISK DRIVE (HARD DISC) (w/ Sound Library Function)

1. Music data of the sound library function is stored on the hard disk drive (hard disc). Make sure to follow the following instructions when replacing the hard disk drive (hard disc):

   Note:

   Data downloaded by the customer may be stored on the hard disk drive (hard disc). This data will be lost when the hard disk drive (hard disc) is replaced. Make sure to warn the customer that their data will be lost and obtain their consent prior to replacing the hard disk drive (hard disc).

   
   

   1. The hard disk drive (hard disc) must only be replaced with a new one. Do not attempt to install a used hard disk drive (hard disc) from another vehicle.

      Note:

      The radio receiver assembly can recognize only a new hard disk drive (hard disc).

   2. 

      *a	Example
      *b	Correct
      *c	Incorrect

      Do not touch the hard disk drive (hard disc) cover.

      Note:

      When removing or installing the hard disk drive (hard disc), only hold it by the areas shown in the illustration.

   3. Do not apply any vibration or shock to the hard disk drive (hard disc).

      Note:
      

      • Do not drop or subject the hard disk drive (hard disc) to severe impact.

      • Do not use the hard disk drive (hard disc) if it has been dropped or subjected to severe impact.

      • Do not store the hard disk drive (hard disc) by itself if it has been removed from the radio receiver assembly. (Only remove the hard disk drive (hard disc) from the radio receiver assembly when a replacement radio receiver assembly or hard disk drive (hard disc) is ready.)

   4. Do not remove the hard disk drive (hard disc) if there is a risk that condensation may occur.

      Note:

      If the temperature of the hard disk drive (hard disc) changes rapidly, condensation may occur inside the unit. This may cause a malfunction of the hard disk drive (hard disc). Therefore, when the radio receiver assembly is removed from the instrument panel, it needs to be kept inside the vehicle or in an environment with an equivalent temperature and humidity.

2. Take measures to prevent static electricity.

   Note:

   Touching the terminals of a connector can cause static electricity to be transmitted to the internal circuits. This may cause a malfunction of the hard disk drive (hard disc).

3. Keep the hard disk drive (hard disc) away from magnets or magnetized items.

   Note:

   Keep the hard disk drive (hard disc) away from speakers, motors, magnetized tools and other magnetic items.

4. Inspect after hard disk drive (hard disc) replacement.

   Note:

   Make sure to perform Check Hard Disk Drive (Hard Disc) in Operation Check to check that there are no hard disk drive (hard disc) abnormalities after removal or installation.

   Click here

PRECAUTIONS FOR G-BOOK (w/ G-BOOK System)

1. The radio receiver assembly functions as the G-BOOK device and holds the G-BOOK ID.

   Note:

   When replacing the radio receiver assembly or telematics transceiver, perform Vehicle Contract Setting

   Click here

2. Necessary data for the G-BOOK system is stored in the radio receiver assembly.

   Note:

   Download necessary data after replacing the radio receiver assembly

   Click here