RADIO ANTENNA CORD REMOVAL

Info Added 2017-08-02

PROCEDURE


  1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY

    Click here

  2. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

    Click here

  3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

    Click here

  4. REMOVE AUTOMATIC LIGHT CONTROL SENSOR

    Click here

  5. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH

    Click here

  6. REMOVE DEFROSTER NOZZLE ASSEMBLY

    Click here

  7. REMOVE NO. 3 HEATER TO REGISTER DUCT

    Click here

  8. REMOVE ANTENNA CORD SUB-ASSEMBLY


    1. w/o Navigation System:


      1. A00070G

        Disengage the 6 clamps and remove the antenna cord sub-assembly.

    2. w/ Navigation System:


      1. A0009Q9

        Disengage the 7 clamps and remove the antenna cord sub-assembly.

  9. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  10. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Remove the adhesive tape from the roof headlining assembly.

      A0006VO
      Text in Illustration
      A0007SL Adhesive Tape - -
      A0009JS Front - -

    2. Disengage the 2 guides and remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.

  11. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY (w/ Roof Antenna)


    1. A0008UE

      Disconnect the connector.

    2. Disengage the 5 clamps and remove the No. 3 antenna cord sub-assembly.